Mineral resources of Poland> Rock raw materials and others> Gypsum and anhydrite
English SelectedChange language to Polish

Gypsum and anhydrite

Gypsum (CaSO4.2H2O) is a product of sea water evaporation in a temperatures lower than those necessary for the precipitation of anhydrite (CaSO4). Gypsum may originate also in the result of hydration of anhydrite. Alabaster is a fine-grained variety of gypsum. Finer kinds of alabaster are used mainly as an ornamental and decorative stone and by sculptors.

Fired gypsum is one of the most common and ancient mortar of buildings. At present, it is widely used in the production of various building materials and prefabricates. It is also used in the production of moulds for the ceramic industry and is added to Portland cement as a component preventing cement flash setting. Some amounts of gypsum are used in the paint, lacquer and varnish industries and its especially pure varieties – in the surgery and dental clinics. Clear colorless gypsum crystals (selenite) were used to make optical instruments. Anhydrite is currently added to Portland cement and in the production of self-leveling floors.

In Poland, deposits of calcium sulfates (gypsum and anhydrite) are associated with saline (halite and potassium-magnesium salts) series of the evaporate formations of the Miocene and Zechstein. Their anticipated economic resources documented in 15 deposits were estimated in 2017 at slightly above 256 million tonnes (decreased by about 0.4% since 2016) and the resources of 4 exploited deposits - at 84.42 million tonnes (decreased by about 1.4% in comparison with 2016 due to the exploitation; Table 1). Economic resources (equal about 68.8 million tonnes) decreased by 1.21 million tonnes, whereas anticipated sub-economic resources have not changed since 2016.

Miocene gypsum deposits of the economic importance are situated mainly along the northern margin of the Carpathian Foredeep, especially in the Nida Basin. In these areas gypsum forms a thick, extensive bed, gently inclined and slightly disturbed tectonically. The gypsum bed crops out at the surface or is covered with a sedimentary blanket a few to over a dozen meters thick. The deposit series is from 3 m to 46 m thick and is characterized by fairly uniform of the mineral raw material and content of CaSO4.2H2O ranging from 85% to 95%. Deposits exploited in this region include Borków-Chwałowice and Leszcze.

Documented deposits of Zechstein sulfates from the Lower Silesian region are characterized by markedly more complex geological conditions (strong tectonic disturbances) and a variability in a quality of mineral raw material. These are mainly deposits of anhydrites and secondary gypsum formed in the result of gypsification of anhydrite in the zones of aggressive groundwater infiltration. Two deposits are exploited in that region: Nowy Ląd and Nowy Ląd-Pole Radłówka (Table 2). The deposits occur at the depth to more than 180 m, their thickness varies from 2 m to 34 m and the content of CaSO4.2H2O ranges from 10.2% to 92.4%. Moreover, estimated resources of non-exploited gypsum and anhydrite deposits which are associated with copper ores of the Lubin-Głogów Copper Area and made accessible by mining works of the copper mines are estimated at 57 billion tonnes.

In an accordance with domestic regulations, gypsum deposits are explored down to the depth of 50 m and those of anhydrite – down to 400 m. The minimum thickness accepted for gypsum deposits is 2 m and for those of anhydrite – 5 m. The accepted minimum content of usable components equals 60% for anhydrite and 80% for gypsum and the maximum ratio of thickness of cap rock to that of the deposit is 0.5 in the case of gypsum deposits.

The location of gypsum and anhydryte deposits in Poland is presented on the map.

Table 1 shows resources and the state of development and exploration of gypsum and anhydrite in Poland.

The geological resources decreased in 2017 – as a result of the exploitation – by 1.21 million tonnes despite a small resources growth (above 45 thousand tonnes in Borków-Chwałowice deposit, almost 20 thousand tonnes in Leszcze deposit and 9.9 thousand tonnes in Nowy Ląd deposit due to the better geological exploration).

The output of gypsum and anhydrite increased by 65 thousand tonnes (6.2%) and amounted to 1.108 million tonnes in 2017. It contained: gypsum from 3 deposits – 994.31 thousand tonnes (increased by 10.7%) and anhydrite from 2 deposits – 113.6 thousand tonnes (decreased by almost 17% in comparison with 2016). It should be emphasized that during the anhydrite exploitation the losses are still significant (about 90% of the output). They are caused by the exploitation system and therefore by the lack of possibilities of including particular resources parts to losses. In case of gypsum losses account for 9% of the output. Still, the residual gypsum emerging in the process of fumes desulfurization is used.

The figure given below show changes in domestic resources and production of gypsum and anhydrite in Poland in the years 1989-2017.

Prepared by: Grzegorz Czapowski